01:01

GCE Integrated 60S 192V 100A High Voltage BMS Battery Management System Smart BMS For UPS BESS

00:45

High Voltage Battery Management System with IP20 Protection 2 Dry Contact Outputs 125A Max Current

01:57

5U Iron Case Battery Management System 576V 400A Single Cabinet

01:16

Integrated BMS Battery Management System 75S 100A 240V For LifePO4 Battery Pack

00:43

Max Current 125A High Voltage BMS For 11 X 15S Battery Strings

00:36

High Voltage BMS , Smart lifepo4 BMS Lithium-ion battery management system for Industrial Battery Solution ESS UPS BESS

01:54

50A 75S BMS 240V BMS Battery Energy Storage System With Overcharge Protection Master And Slave All In One Relay Bms

00:42

Solar Energy Storage BMS 240V 50A Lithium Battery BMS Match With Deye Goodwe Sofar Inverters 10KW 20kWh Ups Application

01:57

75S 100A Master Slave BMS lithium battery management system 240V BMS for lifepo4 battery pack UPS BESS

00:35

GCE 168S 621.6V 100A Battery Monitoring System NMC Bms With External Display For Solar Battery Energy Storage And Ups

GCE 75S 240V 160A high voltage bms smart BMS lifepo4 bms 15S BMU in series battery management system energy storage UPS

Overall Solution High Voltage Battery Management System
Two Categories:
Integrated BMS (30S/96V~75S/240V, Max. 100A)
Separated BMS(60S/192V~270S/864V, Max. 500A)
Support Li-Ion batteries: Lifepo4 batteries, MnNiCo ternary batteries,
Lithium Titanate batteries

75S Smart Bms Battery lifepo4 240V 160A RS485 / CAN communication

4S to 24s low voltage software BMS has a wide range of uses, rich product interfaces, strong scalability and secondary development compatibility;

30s to 75s BMS adopts master-slave integrated design and relay solution to meet the lithium battery demand of multiple strings of small capacity batteries. Greatly reduce the use cost of users;

60s-270s adopts master-slave three-level architecture, which can meet the series and parallel requirements of high-capacity single lithium batteries within 1000V.

Specification

Product Name	BMS
Model no.	RBMS07S2-3-160A240V
protecting method	MCCB+Contactor
Rated Current range	-160A~160A
Voltage Range	48V-240V
Current Sampling Accuracy	1.0%FSR
Communication interface with PCS	RS485/CAN
Communication interface with BMU	CAN
Communication interface with SBMS	RS485/CAN
Communication with monitoring software/EMS	Ethernet
Support IAP upgrade	Yes
Support HMI display and parameter	Yes(Optional)
Insulation detection	Yes(Optional)
High voltage power module	Support DC start (optional)
Dry contact output (normally open)	Up to 3
Maximum qty of BMUs	13
Power	24VDC(18~28V)
Power consumption	≤20W
Size(WHD)mm	3U (440133500)
Way out	Front
Tap center	Not support
Net weight	17kg